should be a certain distance between the sunshade and the shell

should be a certain distance between the sunshade and the shell

Contact us

cooperationlike@gmail.com

Set up a sunshade during a camping picnic to enjoy the scenery of nature without worrying about being tanned by the sun. The small awning is about 12 square meters, the area is large enough, the large one has reached 20 square meters, and there is no pressure to accommodate more than 10 people.

should be a certain distance between the sunshade and the shell

The design of the right body is simple, open the door, and there are electric pedals below to facilitate passengers to get on and off the bus. The door is equipped with a pull-type stove with a single-eye stove, which can independently control the size of the fire, improving the portability of outdoor use and increasing the viewing. The upper area is a double-door cabinet where passengers can place kitchen condiments for outdoor picnics. Above the door is a sunshade for the RV, which extends the awning to better shade and block the light, while expanding the scope of outdoor picnics. The saloon car has a special water injection port to solve the problem of receiving water for passengers.

Glass curtain wall: the curtain wall of the main terminal is in the form of a 18-meter unit, which is divided into 3 small units, two self-supporting columns of the curtain wall, which are placed on the inside of the curtain wall, each column is built-in stainless steel downcomer, the first main column is covered with stone, and the indoor and outdoor ceiling runs through to the outside of the curtain wall; the finger corridor still takes 9 meters as the unit system, and the square column is used for thermal insulation and waterproofing, and the downwater pipe is placed in front and wrapped in stone. The horizontal sunshade is 9 meters long to bear the horizontal wind load, and the gravity load is suspended by stainless steel poles in each vertical seam of glass. The roof boat-shaped large daylighting roof adopts the scale of 1.5X3 meters per piece of glass, and the rest of the strip or distance daylighting roof glass uses a single piece of 1.5X1.5 meter safety scale. The aluminum plate rain canopy is arranged above the curtain wall on both sides of the corridor, and the appropriate lap length is set at the connection part of the corridor to ensure the integrity of the appearance.

should be a certain distance between the sunshade and the shell

In addition to selecting appropriate insulation materials, the correct insulation treatment technology is adopted to form a complete protective layer on the insulation exterior. For protection against sunlight, a sunscreen can be installed at the top of the shell, and there should be a certain distance between the sunshade and the shell to avoid direct heat transfer. In recent years, the cooler is often put on the stator. In order to avoid the condensation of the motor, a moisture-proof heater can be installed. Outdoor motors can be treated similarly according to tropical motor insulation.

Of course, the work of solar greenhouse requires the cooperation of a variety of equipment, with higher and higher temperature requirements, especially in autumn and winter production, external sunshade system, internal thermal insulation system and window opener and fan, wet curtain and other equipment need to be applied.

should be a certain distance between the sunshade and the shell

Interior decoration is a decoration covering the interior of the car, which not only has aesthetics, but also bears a variety of functions. According to the product form, automobile interior parts can be divided into hard interior decoration and soft interior decoration. Hard interior parts mainly take injection molding as the core process, the main products include main and auxiliary dashboards, door panels and column guards, etc., while soft interior products mainly include sunshade panels, ceilings and main carpets.

High temperature and humidity: high temperature and humidity in summer and autumn are also factors that affect the normal work of car stereos. The car is in the upper part of the dashboard, in order to avoid sunlight, the use of sunshade can achieve better results. Timely release of static electricity: more attention should be paid to the use of car stereo in winter, because the climate is dry in winter, turning on warm air in the car will cause drier, which is prone to static electricity.