frame decoration, door liner, sunshade panel, rear roof frame

frame decoration, door liner, sunshade panel, rear roof frame

Contact us

cooperationlike@gmail.com

Yes. Unless the car is affixed with a darker glass explosion-proof film, it is difficult to recognize the condition inside the car near the car body in broad daylight, let alone a surveillance camera 2-3 meters high. However, according to the requirements of the “Technical conditions for the Safety of Motor vehicle Operation”, the windshield of the car and the laminated glass used by drivers to observe the line of sight can thus be seen that the transmittance should be higher than or equal to 70%, and all laminated glass cannot post reflective sunshade film.

frame decoration, door liner, sunshade panel, rear roof frame

Polyurethane, according to the different products of polymerization, is commonly divided into hard polyurethane and soft polyurethane. Polyurethane foam is widely used in automotive interior decoration and vibration-absorbing parts, such as coating materials, polyurethane rigid plastic plates, polyurethane elastomers, seat soft foam materials, decoration parts, sofa leather, roof accessories; the most widely used is a variety of soft and hard polyurethane foam materials, which have vibration insulation, sound insulation, noise reduction, thermal insulation; PU can also be made into automotive polyurethane coatings, binders, sealants and so on. The PU representative parts on the car are dashboard, rearview mirror, bumper, seat cushion, headrest, steering wheel, instrument panel anti-vibration pad, pillar decoration, front roof lining, window frame, ceiling and side roof frame decoration, door liner, sunshade panel, rear roof frame decoration and so on.

1. Interior decoration: interior plastic parts, airbag system, seat belt system, front and rear seats, inner rearview mirror assembly, steering wheel, door trim panel assembly, ceiling, main and auxiliary instrument panel, interior side panel, air outlet, sunshade panel system, suitcase system, floor cushion system, shock absorber pad and other

The structure of the window should be able to control sunlight exposure and limit the area ratio of the window wall. For buildings with larger window area, endothermic glass, heat reflection glass or shading measures should be considered, such as sunshade panels, eaves, eaves, balconies, blinds, curtains and so on. Natural air can be directly used as a source of energy when the outdoor temperature is low, so the structure of the window should be able to open or set a natural vent on it.

frame decoration, door liner, sunshade panel, rear roof frame

News: Hunan Yongzhou grouting Machine address [Co., Ltd.] Welcome to you at present, spray-free plastic has been successfully used in side skirts, central control panels, DVD panels, glove boxes, sunshades, dashboards and other auto parts in the automotive field. Bioplastics bioplastics are produced by using original plants as raw materials, such as sugar cane and corn, under the action of microorganisms. Commonly used plastics generally use petroleum products, and there are often small molecular harmful substances that do not fully react, while bioplastics, due to the use of low-toxic and low-harm renewable raw materials, greatly reduce the VOCs volatilization in the car after turning it into automobile interior parts. In addition, this bioplastic can be used for subsequent use, and is a more environmentally friendly type of plastic.

Flame retardant and other characteristics of anti-impact and corrosion resistance has a long service life to greatly reduce the pressure and shear stress on the surface of the material stack. Autumn rain-proof electric car rain-proof sunshade provides spring sand protection with sponge or soft cloth to scrub the plate, and then rinse with clean water. Function 9, bicycle shed use environment and temperature: used in weak acid-base environment, the temperature is 40Mel 80; the humidity is 10% Mel 90%? Landscape? The production steps of the rain-proof awning of electric vehicles provide ordinary people with sand protection in spring, sunshade in summer, rain protection in autumn and cold in winter.

Automotive interior materials include single materials or laminated composites used in automotive interiors, such as cushions, seats, seat covers, safety belts, headrest, handrails, movable folding of all decorative linings on the roof (including door panels, side panels, rear panels, roof linings, instrument panels, instrument panels, indoor shelves or rear window panels, curtains, floor coverings, sunshades, wheels, covers, engine covers and any other indoor organic materials It includes materials such as packing buffers that absorb collision energy during a collision. The effect of flame retardant treated automobile sound absorbing cotton can not only absorb sound and insulation, but also play an important role in flame retardancy of the whole vehicle.

frame decoration, door liner, sunshade panel, rear roof frame

The 13th Guangzhou sunshade door and window Exhibition, sponsored by Guangzhou Slogart Exhibition Planning Co., Ltd., will be solemnly opened in Guangzhou International Purchasing Center from July 8 to 10, 2023. With the theme of “Intelligent Technology, Green Building, Energy Saving and Environmental Protection”, this exhibition strives to create a building materials industry exhibition platform for domestic customers and traders. As a weather vane of the industry, this platform provides a high-quality procurement platform for dealers, real estate developers, engineers, and even designers, decoration and decoration market, building materials market, door and window market, building materials supermarket, etc., and also provides enterprises with a good opportunity to show new products, expand the market, build channels and promote brands.

China stipulated on October 1, 2007, “the visible light transmittance of the front windshield is not allowed to be less than 70%, and the side window glass is not allowed to post mirror reflective sunshade film.” But in real life, there are often many car owners in order to save money, choose to paste a cheap high imitation film in the automobile supplies wholesale market or roadside shop, but do not realize that this kind of inferior film, not only can not work, but also because it contains formaldehyde, benzene and other harmful ingredients to release harmful substances to the car, damage to the health of passengers, less than two years will fade, but also need secondary film, secondary consumption of